Wearlon™ Nylon

Our range of Wearlon™ Nylon (Polyamide) products come in several types for a variety of functionality and applications. They all share certain properties:

  • High mechanical strength, hardness and stiffness
  • High mechanical damping capacity
  • Good fatigue and very high wear resistance
  • Good sliding and emergency running properties
  • Good machinability
  • Polyamide grades include PA 6, PA66, PA 66 G, Oilamid and Cast Polyamide.

Polyamides (PA) are suitable for a wide spectrum of applications.

Also commonly known as Nylatron®, Ertalon®, LFX®, Austlon® and Oilamid®

 

  • Bearings
  • Guides
  • Chain Wheels and guides
  • Bushing and Cams
  • Slide and guide plates
  • Toothed racks
  • Idler rollers
  • Guide rails
  • Rope pulleys
  • Tappets
  • Piston rings
  • Hard plastic
  • Sliding components
  • Sheave Pulleys
  • Cam disks
  • Gear wheels
  • Mixer blades
  • Transport stars
  • Pinions
  • Pump wheels
  • Curved guides
  • Crane supports
  • Idler and guide rollers
  • Gears
  • Low friction
  • Anti-static plastic
  • Seals
  • Industrial pistons, gears, o-rings, bushes and wear pads

Calaumid® 1200 (PA 12 G) is manufactured by an activated anion reaction. Finished and semi-finished parts are produced in pressureless casting process from laurinlactam. This process makes it possible to produce a material with high molecular weight, optimum crystallinity and very low internal stress.

Calaumid®1200 is distinctive by its significantly low moisture absorbtion, superion dimentional stability coupled with high strength even at low temperatures and an excellent chemical resistance.

Calaumid®1200 is the ideal long-term solution for bushings, bearings, rollers and wheels subjected to high loads and wear, coupled with a need for dimentional stability particularty when in direct contact with water

Calaumid® 1200-Fe has been specially developed for drive elements which must involve high torque values. The knurled metal core is completely covered with low viscosity melted mass. A uniform and tightly adhering bonding exists between core and casting, assuring an optimal and reliable power transfer.

PA 6 & PA 66 are extruded and commonly used under 50mm dia for large repetition work.

PA 6 G – Produced by the monomer casting process for even better strength and abrasion/wear resistance while having a low specific weight for improved balance and reduction of vibration. Also has very good sliding properties and good damping capacity for the reduction of vibrations and noise.

A modification of PA 6 G especially designed for sliding applications through the addition of oil, solid lubricants and stabilizers. Has excellent sliding properties, exceptional wear resistance, lower moisture absorption and better dimensional stability.

Oilamid Technical Data Sheet available here.

SHEET & SLAB: Natural & Black Carbon filled
Size: 2000 mm x 1000 mm
Thickness: 2 mm to 100 mm

ROLLS: Natural
Width: 1000 mm
Thickness: 0.25 mm to 1.5 mm

ROD & TUBE: Extruded Natural & Black Carbon filled
Lengths: 1000 mm & 3000 mm
Diameters: 5 mm to 45 mm

CAST: Natural & Black Carbon filled
Lengths: 1000 mm & 3000 mm
Diameters: 50 mm to 300 mm

Our range of Wearlon™ Nylon products come in several types for a variety of functionality and applications. They all share certain properties:

  • High mechanical strength, hardness and stiffness
  • High mechanical damping capacity
  • Good fatigue and very high wear resistance
  • Good sliding and emergency running properties
  • Good machinability
  • Polyamide grades include PA 6, PA66, PA 66 G, Oilamid and Cast Polyamide.

Polyamides (PA) are suitable for a wide spectrum of applications.

Also commonly known as Nylatron®, Ertalon®, LFX®, Austlon® and Oilamid®

 

Calaumid® 1200 (PA 12 G) is manufactured by an activated anion reaction. Finished and semi-finished parts are produced in pressureless casting process from laurinlactam. This process makes it possible to produce a material with high molecular weight, optimum crystallinity and very low internal stress.

Calaumid®1200 is distinctive by its significantly low moisture absorbtion, superion dimentional stability coupled with high strength even at low temperatures and an excellent chemical resistance.

Calaumid®1200 is the ideal long-term solution for bushings, bearings, rollers and wheels subjected to high loads and wear, coupled with a need for dimentional stability particularty when in direct contact with water

Calaumid® 1200-Fe has been specially developed for drive elements which must involve high torque values. The knurled metal core is completely covered with low viscosity melted mass. A uniform and tightly adhering bonding exists between core and casting, assuring an optimal and reliable power transfer.

PA 6 & PA 66 are extruded and commonly used under 50mm dia for large repetition work.

PA 6 G – Produced by the monomer casting process for even better strength and abrasion/wear resistance while having a low specific weight for improved balance and reduction of vibration. Also has very good sliding properties and good damping capacity for the reduction of vibrations and noise.

  • Bearings
  • Guides
  • Chain wheels and guides
  • Bushing
  • Slide and guide plates
  • Toothed racks
  • Idler rollers
  • Guide rails
  • Rope pulleys
  • Bearings
  • Tappets
  • Cam disks
  • Gear wheels
  • Mixer blades
  • Transport stars
  • Pinions
  • Pump wheels
  • Curved guides
  • Crane supports
  • Idler and guide rollers

A modification of PA 6 G especially designed for sliding applications through the addition of oil, solid lubricants and stabilizers. Has excellent sliding properties, exceptional wear resistance, lower moisture absorption and better dimensional stability.

Oilamid Technical Data Sheet available here.

SHEET & SLAB: Natural & Black Carbon filled
Size: 2000 mm x 1000 mm
Thickness: 2 mm to 100 mm

ROLLS: Natural
Width: 1000 mm
Thickness: 0.25 mm to 1.5 mm

ROD & TUBE: Extruded Natural & Black Carbon filled
Lengths: 1000 mm & 3000 mm
Diameters: 5 mm to 45 mm

CAST: Natural & Black Carbon filled
Lengths: 1000 mm & 3000 mm
Diameters: 50 mm to 300 mm

Why Choose us?

High Quality
Product

Cut To Size Plastics takes pride in supplying the highest quality plastics, ruggedly engineered for tough industrial applications across a wide range of industries.

Experienced
Team

Cut To Size Plastics staff are highly qualified, with a range of different engineering qualifications to assist with finding optimal solutions.

Highly customisable solutions

Cut To Size Plastics has the software and the CNC machines to develop bespoke engineering plastics solutions for diverse customer needs.

Prompt
delivery

Cut To Size Plastics delivers Australia-wide with highly efficient turnaround times. Ask us for an estimated delivery time for your required product.